OPERATING INSTRUCTIONS

All Varimode LED Pool lights

Operating instructions for changing the modes of one light:

Switch the light on, when the light has been on for 10 seconds, switch the light off and back on quickly to change to the next mode, each mode must be on for 10 seconds before switching to the next mode. When the light is switched off and left off for more than 30 seconds, the memory in the light will retain the last selected colour.

Operating instructions for changing two or more LED lights' colour modes to the same mode*:

When two or more lights are used in the same pool and they are operating from the same power source, the lights can be sequenced to the same mode using the following procedure:-

Switch on the lights, by switching the lights off and on three times in quick succession, the lights will sequence to mode 16 which is blue with green fading in and out, once this mode is obtained the lights will stay in sequence. To switch to the next mode, the lights must be left on for at least 10 seconds, then by switching the power off and on quickly the lights will change to the next mode. Each mode must be left on for 10 seconds before switching off and back on to access the next mode.

The same procedure is used when operating the lights with a Varimode remote control.

Varimode lights will not operate on electronic transformers, transformers must be wire-wound. If in doubt, please consult a qualified electrician or contact Varimode Lighting.